That's the first time in a while I've heard of someone lapping
.
| MysteryByte Computers https://www.mysterybyte.com/phpBB3/ |
|
| Clarke's E2180 Lapping Project https://www.mysterybyte.com/phpBB3/viewtopic.php?f=6&t=1041 |
Page 1 of 1 |
| Author: | Clarke [ Wed Oct 01, 2008 10:54 pm ] |
| Post subject: | Clarke's E2180 Lapping Project |
got all of the gear to try my first lapping job will post pics later on tonight |
|
| Author: | skiman [ Thu Oct 02, 2008 4:08 pm ] |
| Post subject: | Re: Clarke's E2180 Lapping Project |
Clarke wrote: got all of the gear to try my first lapping job will post pics later on tonight
Good stuff |
|
| Author: | Clarke [ Thu Oct 02, 2008 5:11 pm ] |
| Post subject: | ok |
ok here is what and how i did my lapping job wet&dry sand paper 400 grit 600 grit 800 grit 1000 grit 1500 grit 2000 grit i started with the 400 and slid the processor back and forth 30 times the rotated it process was dont 4 times did that all the way up to 1500 grit then to polish it i used a fugure 8 patteren on the 2000 grit it camee out like it was glass ill upload a few pics in a while |
|
| Author: | CMDR Steve-O [ Thu Oct 02, 2008 6:21 pm ] |
| Post subject: | |
That's the first time in a while I've heard of someone lapping .
|
|
| Author: | skiman [ Thu Oct 02, 2008 11:36 pm ] |
| Post subject: | Re: ok |
Clarke wrote: then to polish it i used a fugure 8 patteren on the 2000 grit Now you have to do the heat sink. |
|
| Author: | Clarke [ Thu Oct 02, 2008 11:43 pm ] |
| Post subject: | |
yep thats next |
|
| Author: | CMDR Steve-O [ Fri Oct 03, 2008 4:45 am ] |
| Post subject: | |
Get that high quality finish! 
|
|
| Author: | Clarke [ Sat Oct 11, 2008 8:36 am ] |
| Post subject: | here are the pics boys |
well how well did i do my lapping job??? 
|
|
| Author: | CMDR Steve-O [ Sat Oct 11, 2008 9:18 am ] |
| Post subject: | |
heh nice. |
|
| Page 1 of 1 | All times are UTC - 4 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|