MysteryByte Computers
http://www.mysterybyte.com/phpBB3/

q6600
http://www.mysterybyte.com/phpBB3/viewtopic.php?f=8&t=821
Page 1 of 1

Author:  Clarke [ Sat Jul 12, 2008 5:04 am ]
Post subject:  q6600

here is my new overclocking venture


Image

i need to get this on water because i have had it to 3.8 on air but its runng way to hot and shutting down after a few minutes
i try and load up cpuid to get a screen shot then poof its shuts down :evil: :evil: :evil:

so i have this on a thermaltake cooler works ok
but i think the frezzer pro 7 would be a beter bet if i were to keep it on air

Author:  Topsecret66 [ Sat Jul 12, 2008 5:44 am ]
Post subject: 

The freezer pro unfortunately may not get it much over where you are at that point. With my experience the Zalman 8750 (I think?). Got it to 4.0.

I would water it for anything more than 3.8.

Just for even with better air @ 4.0 it wouldn't be stable.

Author:  Topsecret66 [ Sat Jul 12, 2008 5:47 am ]
Post subject: 

But what vcore you running for 3.8 as well?

I'm guessing 1.4v.. because I see it's 1.4v @ 3.0.. Just take you didn't set your vcore back when you went back to 3

Also did you try running a bit higher voltage @ 3.8 as well or is that where you stopped?

Author:  Clarke [ Sat Jul 12, 2008 8:32 pm ]
Post subject:  hey

i am running 1.5 vlts for 3.8

here is a bit more over clocking 3.2 wooohooo
i am getting good at this

i bet ill hit close to 14500-15000 3dmarks on just a 512 card this will be a ego boost for me :D

Image

Author:  Denty [ Sat Jul 12, 2008 8:34 pm ]
Post subject: 

nice. :) im gonna guess on your water cooling, you could hit 3.8-3.9

Author:  Clarke [ Sat Jul 12, 2008 9:31 pm ]
Post subject:  lol+

very easy i think i could i am so restricted on what i can do now

lol i have my tower stiing right in front of my AC unit with the case side ways and door off so it can cool it down


works so far

but @ 3.2-3.4 ghz its shutting down getting too hot

i wonder if i can ihstall my pelt under my thermaltake Cpu heat sink :?:

if so then i can have -10 to -20 deg so i can run a benchmark i think i can crack 18-19k maybe 20k with this setup and single 9800gtx

alot of people are going to doubt me on this but
if i hit 4 ghz on my processor i can go up 6-7 thousand points on 3dmark the overall score

Author:  CMDR Steve-O [ Sat Jul 12, 2008 9:48 pm ]
Post subject: 

Hey I tried to get into Clarke's place but he vehemently opposed such an intrusion since I was not 1337 enuf! That and I didn't have a winter jacket due to the cold temps of L2N cooling :P
Image
(I kid I kid!)

Author:  Clarke [ Sat Jul 12, 2008 10:27 pm ]
Post subject:  lmao

lmao
man you cant just show up like that lol next time call in advance youll need your winter gear :lol:

Author:  Clarke [ Sat Jul 12, 2008 10:44 pm ]
Post subject:  here

yet another jump to 3.3 Ghz

Image

Author:  Clarke [ Sun Jul 13, 2008 12:52 am ]
Post subject:  yes

well guys i got alot higher

3.5 ON AIR wooohoooo stable for now lmao

Image

Author:  Topsecret66 [ Sun Jul 13, 2008 1:39 am ]
Post subject: 

Don't say it's stable till you do Prime 95 or orthos for a few hrs.

Trying just games like crysis, etc. Your processor wont be stressed at all. IE: 100%

So when you go to transcode any media your computer will BSOD on you.

I'm not busting your balls. Just stating a stress test for a prolonged amount of time will let you know that your within a safe, long life area for your CPU. Thus mitigating any problems such as crashes or worse.

Author:  Clarke [ Sun Jul 13, 2008 2:06 am ]
Post subject:  downlaoded

ok downloaded prime 95 and started running
thanks for the info Top :D :D :D
1:53 am
i am going to let it go for 10 hours to see if its blows or what not

if it does il install my other q6600 :D

Author:  Flama22 [ Mon Jul 14, 2008 9:46 am ]
Post subject: 

CMDR Steve-O wrote:
Image


I love that movie. Of all the DVD's I've bought Hackers has to be the one I've watched the most.

Author:  Dr_BenD_over [ Mon Jul 14, 2008 12:06 pm ]
Post subject: 

Managed to do a suicide boot to 3.8 yesterday on mine @ 1.575V

Page 1 of 1 All times are UTC - 4 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/