Once im done my raid on wow i'm going to try 200X21
Just to try again.
| MysteryByte Computers http://www.mysterybyte.com/phpBB3/ |
|
| Topsecret's I920 Overclock results http://www.mysterybyte.com/phpBB3/viewtopic.php?f=8&t=1355 |
Page 1 of 2 |
| Author: | Topsecret66 [ Wed Mar 11, 2009 7:56 pm ] |
| Post subject: | Topsecret's I920 Overclock results |
Asus Rampage 2 Extreme OCZ 4 GB 12800 GTX 280 OCE Coolermaster V8 Velo 300GB for OS 2x 500GB Raid 0 Gaming @ 3.8 Ghz SM 2.0 7835SM MS 3.0 8524 CPU 7310 Total 20090 Marks Now this wasn't as fast as my Q9550 results. But I did have a 4870X2 as well. which would have made up the difference im guessing. If I had it still I would try. I will be trying some more overclocking later Temp results: Min: 38,38,39,40C Max (During the CPU Tests): 77,77,74,73C |
|
| Author: | Topsecret66 [ Wed Mar 11, 2009 8:25 pm ] |
| Post subject: | |
3990 Mhz 190 Bclock x 21 (Turbo) EDITTT 20754 Marks 8222 2.0 8625 3.0 7670 cpu temps (top min bottom max) 41,40,41,39 min 80,79,78,76 max AS5 hasn't set in as well. So may get better in time. PS: It's actually the compound that came with the V8. figured I would try it. |
|
| Author: | skiman [ Wed Mar 11, 2009 10:35 pm ] |
| Post subject: | |
What were your voltage settings? How about running a 200 x 21? |
|
| Author: | Topsecret66 [ Wed Mar 11, 2009 10:47 pm ] |
| Post subject: | |
200 X 21 isn't working atm. Don't know why yet. I havent done a overnight bulletproofing as well. For the time being tonight I have been optimizing my GTX 280. I would take suggestions With the current OC i'm at 1.416v QPI Link @ 3420.2 |
|
| Author: | Topsecret66 [ Wed Mar 11, 2009 10:48 pm ] |
| Post subject: | |
Once im done my raid on wow i'm going to try 200X21
Just to try again. |
|
| Author: | Topsecret66 [ Wed Mar 11, 2009 10:49 pm ] |
| Post subject: | |
It does post but wont boot windows. |
|
| Author: | Topsecret66 [ Wed Mar 11, 2009 11:17 pm ] |
| Post subject: | |
Edit to one of my posts I was 190X21 |
|
| Author: | Topsecret66 [ Thu Mar 12, 2009 8:22 pm ] |
| Post subject: | |
4.2 now HT off 200x21 max temp was 70c |
|
| Author: | Topsecret66 [ Thu Mar 12, 2009 11:38 pm ] |
| Post subject: | |
4.2 Wasn't stable what so ever. Had to bump my voltage to 1.45vcore Dram Bus to 1.64v 1.67 being the limit 200X21 with Turbo mode on and qpi/vtt to 1.360v Not totally sure these are accurate but im going to goto the bios and do some tuning 
20664 Marks without HT, HT off saved me mucho temps |
|
| Author: | Topsecret66 [ Thu Mar 12, 2009 11:59 pm ] |
| Post subject: | |
4405 Mhz 20X 211 (Turbo on) HT Disabled C1E Disabled Hardware prefetcher disabled Intel VT Disabled CPU TM Disabled A20M Disabled Speedstep Enabled Turbo Mode Enabled C-State Disabled Vcore 1.5v Dram Bus 1.64v (Really need new ram) Qpi/Vtt 1.5v GTX 280 stock so far till tuning complete. |
|
| Author: | Topsecret66 [ Fri Mar 13, 2009 12:51 am ] |
| Post subject: | |
Scratch 4405. Ran but wont prime. Downclocking yet again to 4 and starting from scratch.... |
|
| Author: | skiman [ Fri Mar 13, 2009 8:39 am ] |
| Post subject: | |
4.0 on air is very respectable. |
|
| Author: | Topsecret66 [ Fri Mar 13, 2009 2:38 pm ] |
| Post subject: | |
Not when I didn't write down the settings. Back to scratch at 3.8 now. Any more F-ups prior to work will leave me at stock till im off tomorrow. I'm going to prime 3.8 no HT atm. |
|
| Author: | Topsecret66 [ Fri Mar 13, 2009 2:54 pm ] |
| Post subject: | |
NM found settings for 4.0 HT off 1.45vcore 1.375 qpi/dram dram 1.65 190x20 Speedstep/Turbo on |
|
| Author: | Topsecret66 [ Fri Mar 13, 2009 3:46 pm ] |
| Post subject: | |
19x20 SS on HT off 4.2 1.40vcore 1/375 qpi (will be lowering once vcore is done. But have to goto work Only had time to prime for an hour and no errors.. But it can do better im sure. Anywho off to MB to RMA my other pc parts. |
|
| Page 1 of 2 | All times are UTC - 4 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|